You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

How to add an Xem module to an EPC/CON unit in Windows 2000 or XP

Installation procedure:

1. Power off the EPC/CON unit, and connect the Xem module. If you have a Modems module, it must be powered off before connecting it to the EPC/CON.

2. Turn the power back on.

3. Open the properties of the adapter in Windows Device Manager.

4. Select the concentrator you are adding the module(s) to and click the Add button.

5. Select the appropriate type of module and click OK.

6. Click OK again. The concentrator(s) will reboot, and the additional ports should appear in Device Manager.  

Last updated: Jun 06, 2019

Recently Viewed

No recently viewed articles

Did you find this article helpful?