From time to time, you may want to know what XBee modules are on your XBee network. This can be done via the IX15.
You can make this simple by running the following commands or functions on the IX15 and your local XBee modules firmware.
From the CLI interface on the IX15, issue the following command: "xbee network discover async ".
Then on the Profile of the local XBee module, set the Join Notificaiton (JN) to a value of "1".
By doing this, the XBee network table will be filled in as XBee modules join the network.
Last updated:
Sep 08, 2023