For information on available variants, see the Part Numbers & Accessories section of the ConnectCore 8X product page.

See U-Boot files by variant for a list of U-Boot files associated with each variant type.

You can find the variant number of your module on the serial console boot log:

U-Boot SPL dub-2020.04-r6.1 (Sep 19 2023 - 07:15:55 +0000)
Normal Boot
Trying to boot from MMC1
Primary set selected
Load image from MMC/SD 0x59c00


U-Boot dub-2020.04-r6.1 (Sep 19 2023 - 07:15:55 +0000)

CPU:   NXP i.MX8QXP RevC A35 at 1200 MHz at 33C
DRAM:  2 GiB
MCA:   HW_VER=1  FW_VER=1.01
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial
Out:   serial
Err:   serial
Model: Digi International ConnectCore 8X SBC Pro Board.
ConnectCore 8X SOM variant 0x02: 2 GiB LPDDR4, Wi-Fi, Bluetooth, MCA, Crypto-auth
  Board version 3, ID 135
Boot:  MMC0

 BuildInfo:
  - SCFW 6638c032, SECO-FW c9de51c0, IMX-MKIMAGE 3bfcfccb, ATF e4b2dbf
  - U-Boot dub-2020.04-r6.1

flash target is MMC:0
Net:   eth0: ethernet@5b040000 [PRIME], eth1: ethernet@5b050000
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot:  0
=> 

See also

See Simulate a SOM variant for instructions on simulating via software a variant with less cores and RAM memory.