- To turn debugging on:
- adb -w -k /stand/vmunix /dev/mem
You won''''t get a prompt, just start typing stuff.
- drp_port_debug/X
To see the debug flag we care about.
It will response with something similar to:
drp_port_debug/X
drp_port_debug:
drp_port_debug: 0
- drp_port_debug/W -1
To turn on debugging.
- drp_port_debug/X
To verify it was set correctly, you should see:
drp_port_debug:
drp_port_debug: 0xFFFFFFFF
- To turn debugging off, you will repeat the process, but switch the -1 to a 0.
- To leave adb, type $q
- At this point, it will log everything to /var/adm/syslog/syslog.log
Last updated:
May 09, 2019