TransPort router DHCP client CLI commands

To view the status of Ethernet 0 interface:
eth 0 status

To view the status of Ethernet 1 interface:
eth 1 status

For example:
eth 0 status
Activation Status:      Active
Connection Status:      Connected
Link:                   100Base-T Full-Duplex
Physical Port:          ETH 0
MAC:                    00 04 2D 03 9F 70
IP Address:             192.168.0.14
Mask:                   255.255.255.0
DNS Server:             192.168.51.1
Secondary DNS Server:   8.8.8.8
Gateway:                192.168.0.1
DHCP Server:            192.168.0.1
Lease Remaining (mins): 1439
OK


Syntax for working with the DHCP client:
dhcpcli renew|release|discover <ifname> <ifnum>
Where <ifname> is the interface name, in this example 'eth' is used.
Where <ifnum> is the interface number, in this example '0' is used.

To release the DHCP obtained IP address on Eth 0:
dhcpcli release eth 0

For example:
dhcpcli release eth 0
OK
eth 0 status
Activation Status:      Inactive
Connection Status:      Connected
Link:                   100Base-T Full-Duplex
Physical Port:          ETH 0
MAC:                    00 04 2D 03 9F 70
IP Address:             0.0.0.0
Mask:                   0.0.0.0
Gateway:                0.0.0.0
DHCP Server:            0.0.0.0
Lease Remaining (mins): 0
OK

To renew the DHCP obtained IP address on Eth 0:
dhcpcli renew eth 0

For example:
dhcpcli renew eth 0
eth 0 status
Activation Status:      Active
Connection Status:      Connected
Link:                   100Base-T Full-Duplex
Physical Port:          ETH 0
MAC:                    00 04 2D 03 9F 70
IP Address:             192.168.0.16
Mask:                   255.255.255.0
DNS Server:             192.168.51.1
Secondary DNS Server:   8.8.8.8
Gateway:                192.168.0.1
DHCP Server:            192.168.0.1
Lease Remaining (mins): 1439
OK

To view the status of the DHCP client on all interfaces:
dhcpcli status

For example:
dhcpcli status
DHCP client status on ETH 0
                ipaddr : 192.168.0.16
                  mask : 255.255.255.0
               gateway : 192.168.0.1
            dns_server : 192.168.51.1
  secondary dns_server : 8.8.8.8
           dhcp_server : 192.168.0.1
       lease remaining : 1435 mins

DHCP client status on ETH 1
                ipaddr : 0.0.0.0
                  mask : 0.0.0.0
               gateway : 0.0.0.0
           dhcp_server : 0.0.0.0
       lease remaining : 0 mins

OK


DHCP server status commands:

DHCP server 0  status
dhcp 0 status

DHCP server 1  status
dhcp 0 status

For example:
dhcp 0 status
Entry: IP [192.168.0.16], hostname [WR21], MAC [00:04:2D:01:2F:22], expiry 454 (mins)
OK