You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

Sending a break from an existing session with the Digi CM.

  • From a telnet session.
    • If the telnet was initiated from a unix command line telnet client. Issuing the telnet escape sequence "^]" (control-right_square_bracket) will take you to the "telnet>" prompt. 
      telnet>send brk
    • Other telnet clients often have a "send break" option.

       

  • From an ssh session. 
    Type the "~break" [tilde-break] which is the default ssh break characters.
    • The ssh break can be changed from the WEB UI or confg menu under "Serial Ports" -> "Configuration" -> "Host mode configuration" -> "SSH break sequence".
Last updated: May 09, 2019

Filed Under

Network

Recently Viewed

No recently viewed articles

Did you find this article helpful?