Methods of Locating Cellular Radio Type Installed Within a DAL Device

Below is a list of methods to locate the type of cellular radio that is installed within your DAL device:


Physical CORE Radio (if applicable)
Top line of the device
 Physical-3.jpg


aView
Under Cellular Details, you will note Modem
 aView.png


Digi Remote Manager (using V3.0)
Note that the current version of Digi Remote Manager does not have the proper options to do this and you must enter Version 3.0.
To get to Version 3.0, after entering Digi Remote Manager, click on the “Try the Remote Manager 3.0 Preview” in the upper right hand corner.  This is a green box.
Once you click on it, it will open a new window. 
Under Devices, click on the particular device
Click Console
Enter the following command:
show modem imei <imei number> verbose
Please note: Above, where it says <imei number>, you can either enter the IMEI number or you can hit the space bar and it will fill it in for you.
The results will yield you the Manufacturer and Model.
Digi-Remote-Manager.png 

WebUI
Under Status > Connections > Modems, under Details you will see the Manufacturer and Model.
WebUI.png 


CLI
Enter the following command:
show modem imei <imei number> verbose
Please note: Above, where it says <imei number>, you can either enter the IMEI number or you can hit the space bar and it will fill it in for you.
The results will yield you the Manufacturer and Model.
CLI.png
Last updated: Mar 27, 2020

Filed Under

Cellular/Transport

Recently Viewed

No recently viewed articles

Did you find this article helpful?