You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

How to clear provisioning on a TransPort with a Sprint C1 module

Issue:

TransPort with "C1" ("Sprint EVDO") module was working with Sprint, Sprint deactivated it, Sprint re-activated it, and the unit is no longer connecting to Sprint.  Because these units by default are provisioned automatically, the provisioning needs to be cleared.

Resolution:

1. Telnet or SSH into the TransPort to access the CLI then issue the following 3 commands, to clear the provisioning:

python -m misc/mcmdi at#rtn=1
python -m misc/mcmdi at#rtn=4
python -m misc/mcmdi AT#OMADMCEN=0


2. Reboot the TransPort.

3. The unit should re-provision itself if the Vision plan is being used.

Last updated: Mar 04, 2019

Filed Under

Cellular/Transport

Recently Viewed

No recently viewed articles

Did you find this article helpful?