With the router powered off, insert a SIM card into BOTH SIM slots of the Digi Transport and open the CLI interface.Access to the CLI (Command Line Interface) – this can be achieved:
Issue the following command:
- Through the serial port @115200 bps
- Via a telnet or SSH connection
- Via the “execute a command” page of the web user interface.
This command tells you which SIM slots are populated and also the SIM that is currently in use. The value before the comma is SIM 1 and the value after the comma is SIM 2. 1000 means that the SIM is present. 1001 means that the SIM is present and the active SIM. Here is a summary: 1 = SIM not present
1000 = SIM present1001 = SIM present and connected The output should be as follows: Showing that SIM 1 is present and active and SIM 2 is present.If the SIM cards are physically inserted but do not show as present please request an RMA with reason “SIM DETECTION FAIL”
Mar 04, 2019