Here is a known-working pinout to connect a BayTech RPC-2 (Remote Power Control Unit) RJ-45 port to a Digi RJ-45 port, such as that found on our Acceleport, Portserver, Portserver II, and Portserver TS line products. This cable has been tested and found to work with the BayTech RPC-2, though it may work with other BayTech RJ-45 interfaced products as well:
| EIA 232 Digi RJ-45 to BayTech RJ-45 |
| Signal | Digi
RJ-45 | | BayTech
RJ-45 | Signal |
| DSR | 1 | -------- | 1 | DTR |
| RTS | 2 | -------- | 8 | DCD |
| GND | 3 | -------- | 2 | GND |
| TxD | 4 | -------- | 5 | RxD |
| RxD | 5 | -------- | 4 | TxD |
| SG | 6 | -------- | 7 | GND |
| CTS | 7 | -------- | 3 | RTS |
| DTR | 8 | -------- | 6 | N/C |
Last updated:
Mar 22, 2019