How To Add a Digi Router to your Remote Manager account

This article explains how to add your Digi device to a DRM account.


This article assumes that you have already set up your device to connect to the DRM and that you have a DRM account.
 

Login to the DRM account, go to the Devices tab and click on Add:

Insert the Device ID, the MAC address or the IMEI of the device (in this example the MAC is used) and the default password:

You can find the MAC and the Default Password on the device label:

 

Note: You can also add multiple devces using a CSV file:

Once you have cliccked on Add device, you should see the device line added in the devices list, with no details in it (except the MAC/Device ID that were provided in the adding phase) and a disconnected status (red):

After few minutes, the device should be shown as connected (green) and details should be uploaded and displayed:

Now the device can be managed by DRM.

Note: for DAL devices with firmware version 23.9 and newer:

The device can be added to a DRM account from the local WEB UI Dashboard by clicking on the "Register device in new account" link and inserting the DRM account credentials:

 

 

 

 

 

Last updated: Mar 22, 2019

Filed Under

Digi Remote Manager

Recently Viewed

No recently viewed articles

Did you find this article helpful?