Home/Support/Support Forum/Is the Digicanbus module available for the WVA ?
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Is the Digicanbus module available for the WVA ?

0 votes
Hi everyone,

I am currently trying to send a J1939 message with my WVA device to other ECUs on my can bus.
And the digicanbus module happen to have a "send(...)" function that, at first sight, would perfectly fulfilled my needs.
According to the digi documentation "Digi Python enabled products with a CAN bus hardware interface support this module"

(on this web page : https://www.digi.com/resources/documentation/digidocs/90001537/#References/r_avail_digicanbus.htm?TocPath=Module%253A%2520digicanbus%257C_____5)

I think that the WVA should then be able to use this module. However, it looks like the module isn't a basic module for this product.

Jun 13 09:22:22 local7.info pylog: from digicanbus import *
Jun 13 09:22:22 local7.info pylog: ImportError: No module named digicanbus

Is there a way to import it on my WVA and to use this built-in module ?
If not, how can I send custom messages to my other devices using the WVA ? Using a python script or not.

Thank you for your attention.
asked Jun 13 in Python by McRitchi New to the Community (3 points)

Please log in or register to answer this question.

1 Answer

0 votes
The digicanbus.py python script found on that webpage was written for a different product known as the ConnectPort X5. The ConnectPort X5 product has been end-of-lifed for quite a few years.

The only script at the Wiki archive site written for the WVA is the following:

https://www.digi.com/resources/documentation/digidocs/90001537/#References/r_WVA_datastream_to_device_cloud.htm

You can find some additional WVA python scripts on our Github page here: https://github.com/orgs/digidotcom/repositories?q=wva&type=all&language=&sort=

Hope that helps!
answered Aug 16 by michaelt Veteran of the Digi Community (769 points)
...