Smart part number Part number SOM variant Description Wi-Fi / Bluetooth U-Boot file

CC-WMX-JN58-NE

50001939-01

0x02

ConnectCore for i.MX6UL, 528 MHz, Industrial Temp, 256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet, 802.11a/b/g/n/ac, Bluetooth 4.2, ANT+

checkmark

u-boot-ccimx6ulstarter.imx u-boot-ccimx6ulsbc.imx

CC-MX-JN58-Z1

50001939-02

0x03

ConnectCore for i.MX6UL, 528 MHz, Industrial Temp, 256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet

xmark

u-boot-ccimx6ulstarter.imx u-boot-ccimx6ulsbc.imx

CC-WMX-JN7A-NE

50001939-04

0x04

ConnectCore for i.MX6UL, 528 MHz, Industrial Temp, 1GB SLC NAND, 1 GB DDR3, Dual 10/100 Ethernet, 802.11a/b/g/n/ac, Bluetooth 4.2, ANT+

checkmark

u-boot-ccimx6ulstarter1GB.imx u-boot-ccimx6ulsbc1GB.imx

CC-MX-JN7A-Z1

50001939-05

0x05

ConnectCore for i.MX6UL-2, 528 MHz, Industrial Temp, 1GB SLC NAND, 1 GB DDR3, Dual 10/100 Ethernet

xmark

u-boot-ccimx6ulstarter1GB.imx u-boot-ccimx6ulsbc1GB.imx

You can find the variant number of your module on the serial console boot log:

U-Boot dub-2017.03-r2.1-git+g96bce8e (Oct 26 2018 - 09:51:55 +0000)

CPU:   Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 55C
Reset cause: POR
I2C:   ready
DRAM:  256 MiB
MCA:   HW_VER=1  FW_VER=1.02
PMIC:  PFUZE3000 DEV_ID=0x30 REV_ID=0x11
NAND:  256 MiB
MMC:   FSL_SDHC: 0
In:    serial
Out:   serial
Err:   serial
Model: Digi International ConnectCore 6UL SBC.
ConnectCore 6UL SOM variant 0x02: Industrial Ultralite 528MHz, 256MB NAND, 256MB DDR3, -40/+85C, Wireless, Bluetooth
Board: ConnectCore 6UL SBC Pro, version 3, ID 135
Boot device:  NAND
Net:   FEC0 [PRIME]
Hit any key to stop autoboot:  0
=>